CD series water based Pigment dispersion product features:
1). Conforming to Oeko-Tex 100-2016（Class II）Standard of International Association for Research & Testing in the field of Textile Ecology (contents restriction of formaldehyde and heavy metal, APEO, phthalates and 24 kinds of prohibited aromatic amines);
2). Conforming to REACH Regulations of SVHC limited standards with 163 kinds substances;
3). Applicable: cotton, linen, polyester, acrylic and so on; or yarn, fabric and garment.
4). Cationic (grafting) pretreatment is not needed for dyeing, process is shorter, dyeing is simpler;
5). Compared with traditional pigment dispersion, dyeing fully, the dyed color is uniformity, color of drain is so shallow or colorless;
6). Dyeing with the matched adhesive, the fastness fully meets or exceeds the modified dyeing of traditional pigment dispersion;
7). The same as traditional pigment dispersion, CD series pigment dispersion can be used for dyeing secondly cooperated with dyes.
Conditions explanation for testing on formaldehyde, heavy metal, phthalates, APEO and 24 kinds of prohibited aromatic amines:
All testing are depended on printed pure cotton cloth with 10% pigment dispersion of water paste. If the customer exceeds the above conditions, please make the sample testing before mass production;.
8). Any safe question in using, please refer to corresponding MSDS;
The case of textile cationic dyeing process:
1). Dyeing ratio:
2). Dyeing Process:
3). Caution during the dyeing:
A. Prepared the dyeing bath: Add water and pigment dispersion firstly and stirring evenly, then put acetic acid evenly, at last add dyed fabric; you can also choose other weak acid instead of acetic acid, adjust the PH value at 4-6.
B. Temperature rising and dyeing: Keep stirring during heating and dyeing, pay attention to the temperature rising speed especially at a small bath ratio. If unequally dyeing happened, you can settle it by decreasing the temperature rising speed. The residual dyeing liquor is almost colorless.
C. Fixation: After dyeing and the color matching, here adhesive is added into the dyeing bath directly. Keeping temperature at 70℃ for 10 minutes, then wash it. Finally is after-treatment, you can add other auxiliaries to improve the fastness and feel.
D. Cleaning: If there is a slight staining on device，we advice to use ester solvents for cleaning.
E. Drying: dry at 60℃ with no wind and baking at 150℃, while the fluorescent color baking at 130℃.
Some of CD series textile cationic dyeing pigment dispersion shown
If need to know more about it, please check the CD series eco-friendly textile cationic dyeing pigment dispersion.